Unable to access Ignite Ec2 Instance from Local PC

classic Classic list List threaded Threaded
10 messages Options
sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Unable to access Ignite Ec2 Instance from Local PC

Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala

ilya.kasnacheev ilya.kasnacheev
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala

sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC


On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

himanshu himanshu
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

himanshu himanshu
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

Can you share screenshot of your inbound traffic setting, I think it need to be something like this

Example: 

Inbound: 
Custom TCP Rule TCP 10800 - 10900 0.0.0.0/0 client 
Custom TCP Rule TCP 47500 - 47600 0.0.0.0/0 discovery 
Custom TCP Rule TCP 47100 - 47200 0.0.0.0/0 communication 

Outbound: 
All traffic All All 0.0.0.0/0 
All traffic All All ::/0 


On Fri, Aug 9, 2019 at 9:52 AM sri hari kali charan Tummala <[hidden email]> wrote:
yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

give me couple of minutes I think I opened 0 to 65000 ports for inbound thats it , if I have to open all these ports separately I have to give a try.

On Fri, Aug 9, 2019 at 10:55 AM Himanshu Gupta <[hidden email]> wrote:
Can you share screenshot of your inbound traffic setting, I think it need to be something like this

Example: 

Inbound: 
Custom TCP Rule TCP 10800 - 10900 0.0.0.0/0 client 
Custom TCP Rule TCP 47500 - 47600 0.0.0.0/0 discovery 
Custom TCP Rule TCP 47100 - 47200 0.0.0.0/0 communication 

Outbound: 
All traffic All All 0.0.0.0/0 
All traffic All All ::/0 


On Fri, Aug 9, 2019 at 9:52 AM sri hari kali charan Tummala <[hidden email]> wrote:
yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

please check.

On Fri, Aug 9, 2019 at 10:58 AM sri hari kali charan Tummala <[hidden email]> wrote:
give me couple of minutes I think I opened 0 to 65000 ports for inbound thats it , if I have to open all these ports separately I have to give a try.

On Fri, Aug 9, 2019 at 10:55 AM Himanshu Gupta <[hidden email]> wrote:
Can you share screenshot of your inbound traffic setting, I think it need to be something like this

Example: 

Inbound: 
Custom TCP Rule TCP 10800 - 10900 0.0.0.0/0 client 
Custom TCP Rule TCP 47500 - 47600 0.0.0.0/0 discovery 
Custom TCP Rule TCP 47100 - 47200 0.0.0.0/0 communication 

Outbound: 
All traffic All All 0.0.0.0/0 
All traffic All All ::/0 


On Fri, Aug 9, 2019 at 9:52 AM sri hari kali charan Tummala <[hidden email]> wrote:
yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala


Screen Shot 2019-08-09 at 11.19.49 AM.png (38K) Download Attachment
Screen Shot 2019-08-09 at 11.19.43 AM.png (44K) Download Attachment
sri hari kali charan Tummala sri hari kali charan Tummala
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

the Blog has issue's the code which is in public s3 bucket doesn't exist so the ec2 instance doesn't have to ignite at all I raised a concern with AWS Blog team, I will try community ami Ignite ec2 instance or try to install ignite on my own manually.

On Fri, Aug 9, 2019 at 11:20 AM sri hari kali charan Tummala <[hidden email]> wrote:
please check.

On Fri, Aug 9, 2019 at 10:58 AM sri hari kali charan Tummala <[hidden email]> wrote:
give me couple of minutes I think I opened 0 to 65000 ports for inbound thats it , if I have to open all these ports separately I have to give a try.

On Fri, Aug 9, 2019 at 10:55 AM Himanshu Gupta <[hidden email]> wrote:
Can you share screenshot of your inbound traffic setting, I think it need to be something like this

Example: 

Inbound: 
Custom TCP Rule TCP 10800 - 10900 0.0.0.0/0 client 
Custom TCP Rule TCP 47500 - 47600 0.0.0.0/0 discovery 
Custom TCP Rule TCP 47100 - 47200 0.0.0.0/0 communication 

Outbound: 
All traffic All All 0.0.0.0/0 
All traffic All All ::/0 


On Fri, Aug 9, 2019 at 9:52 AM sri hari kali charan Tummala <[hidden email]> wrote:
yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala

himanshu himanshu
Reply | Threaded
Open this post in threaded view
|

Re: Unable to access Ignite Ec2 Instance from Local PC

Sorry for late response , your configuration looks correct. I hope community ami will solve the problem.

-Himanshu

On Fri, Aug 9, 2019 at 11:07 AM sri hari kali charan Tummala <[hidden email]> wrote:
the Blog has issue's the code which is in public s3 bucket doesn't exist so the ec2 instance doesn't have to ignite at all I raised a concern with AWS Blog team, I will try community ami Ignite ec2 instance or try to install ignite on my own manually.

On Fri, Aug 9, 2019 at 11:20 AM sri hari kali charan Tummala <[hidden email]> wrote:
please check.

On Fri, Aug 9, 2019 at 10:58 AM sri hari kali charan Tummala <[hidden email]> wrote:
give me couple of minutes I think I opened 0 to 65000 ports for inbound thats it , if I have to open all these ports separately I have to give a try.

On Fri, Aug 9, 2019 at 10:55 AM Himanshu Gupta <[hidden email]> wrote:
Can you share screenshot of your inbound traffic setting, I think it need to be something like this

Example: 

Inbound: 
Custom TCP Rule TCP 10800 - 10900 0.0.0.0/0 client 
Custom TCP Rule TCP 47500 - 47600 0.0.0.0/0 discovery 
Custom TCP Rule TCP 47100 - 47200 0.0.0.0/0 communication 

Outbound: 
All traffic All All 0.0.0.0/0 
All traffic All All ::/0 


On Fri, Aug 9, 2019 at 9:52 AM sri hari kali charan Tummala <[hidden email]> wrote:
yes, all traffic inbound and outbound (TCP), I am able to do ssh also I am able to ping public ip address from my laptop and the Ec2 instance is able to ping the www.amazon.com.



On Fri, Aug 9, 2019 at 10:46 AM Himanshu Gupta <[hidden email]> wrote:
Did you open the ports on EC2 at which your ignite cluster is running?

On Fri, Aug 9, 2019 at 8:50 AM sri hari kali charan Tummala <[hidden email]> wrote:

On Fri, Aug 9, 2019 at 8:27 AM Ilya Kasnacheev <[hidden email]> wrote:
Hello!

In my experience, on EC2 nodes usually use internal network to talk to each other. They will advertise these to any nodes trying to connect, which will cause issues.

Is it an option for you to use some flavor of Thin Client to talk to your cluster? We do not recommend having heterogenous, non-collocated clusters, and this includes thick client nodes.

Regards,
--
Ilya Kasnacheev


пт, 9 авг. 2019 г. в 03:35, sri hari kali charan Tummala <[hidden email]>:
Hi All, 

I am trying to connect a ignite ec2 instance (one node) remotely from local PC Mac Intellij Idea I am using TcpDicoverySpi to connect ignite ec2 instance public IP but its failing to connect I did open all the ports I was able to do ssh and ping the host from my local PC even on the remote host I am able to access internet, ignite right now fails with below error.

[20:14:54] Failed to connect to any address from IP finder (will retry to join topology every 2000 ms; change 'reconnectDelay' to configure the frequency of retries): [/52.204.222.254:47500, /52.204.222.254:47501, /52.204.222.254:47502, /52.204.222.254:47503, /52.204.222.254:47504, /52.204.222.254:47505, /52.204.222.254:47506, /52.204.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

I am following below blog , can any one help how to access ignite cluster which is setup remotely do I need to build my code and run in the cluster by ssh to the box ?

4.222.254:47507, /52.204.222.254:47508, /52.204.222.254:47509, /52.204.222.254:47510]

Thumbnail


--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala



--
Thanks & Regards
Sri Tummala